More Applications

All of your Charging & Starting needs

Altsforless Electrical Suppliers

Page 2

Electrical Parts

Starter/Generator - Mando
23 Amp/12 Volt, CW

                          

$177.95

Part # 15404 Starter/Generator - Mando 23 Amp/12 Volt, CW Used On: Club Car Golf Carts & Utility Vehicles Replaces: Club Car 1018337-01, Mando G278441, Valeo TMC001B0021 Features : 100% New

Starter/Generator - Hitachi
12 Volt, CW

$136.95

Part # 15421N Starter/Generator - Hitachi 12 Volt, CW Used On: Club Car, E-Z-GO Golf Carts & Utility Vehicles Replaces: Club Car 1012316, E-Z-Go 16511G1 Hitachi GSB107-01A, GSB107-04A Lester Number : 15421 Features : 100% New

Starter - Hi-Performance OSGR
2.0kW/12 Volt, CW, 9-Tooth Pinion

$153.95

Part # 18493CN Starter - Hi-Performance Hitachi OSGR 2.68hp (2.0kW)/12 Volt, CW, 9-Tooth Pinion Used On: Chevrolet Small & Big Block 262-454 CID V6-V8, w/ AT or MT, w/ 153-Tooth or 168-Tooth Flywheel (up to 18:1 Compression Ratio) Replaces: Ref. No. PE-106 Lester Number : 3510, 3631, 3838, 18493 Dimensions : 230mm OAL Notes : Upgrade the old, heavy Delco 10MT design to a hi-torque Hitachi OSGR design (Lester 16584). Ideal for hi-performance & street-rod applications. Includes shim kit and 2) 3/8-16 x 4 in. bolts (3/8 shank, 9/16 hex drive). Components : 79-81107 Mtg. Shim Kit Features : 100% New Chrome finish Rotatable mounting pad, 3-clocking positions

Starter - Hi-Performance PG260M
1.7kW/12 Volt, CW, 11-Tooth Pinion

$109.95

Part # 3838N Starter - Hi-Performance PG260M 1.7kW/12 Volt, CW, 11-Tooth Pinion Used On: Chevrolet Small Block or Big Block V8 Engines w/ 153-Tooth Flywheel Lester Number : 3631, 3838 Notes : Upgrade the old, heavy 9-tooth, 10MT design to a high output, lightweight, 11-Tooth PG260M starter. Ideal for hi-performance, marine & street-rod applications. 2-1590-DR-2 has a 4-Terminal solenoid w/ relay & switch terminals. Components : 2-1760-DR-2 Starter 84-1506 Mounting Bolt 84-1507 Mounting Bolt 71-1114 Gasket Features : 100% New 1.7 kW high-performance retrofit Mounting bolts and bell housing gasket included 4-terminal, sealed solenoid Smaller and lighter, 7.7 lbs. Hi-performance rare earth magnets are completely sealed from moisture & contaminants Field case assys. are 100% tested on a computerized gaussmeter to measure magnet strength & position. Zinc plated field case, solenoid, C.E. cover & hardware Armatures are precision balanced & feature banded hairpins Commutators are stake-welded & polished for longer brush life Carbon brushes are welded - same as OE Starter, drive & solenoid are endurance tested

Starter/Generator - Hitachi
25 Amp/12 Volt, CCW

$136.95

Part # 15435N 15435N (Ref. Num.3-1022-01HI-1 ) Starter/Generator - Mando 25 Amp/12 Volt, CCW Used On: Club Car FE290, FE350 Golf Carts Replaces: Club Car 1018294-01, Mando M063686, Valeo TMC001B0011 Lester Number : 15435 Features : 100% New

Starter - Hi-Performance OSGR
1.4kW/12 Volt, CW, 9-Tooth Pinion

$129.95

Part # 18493N Starter - Hi-Performance OSGR 1.4kW/12 Volt, CW, 9-Tooth Pinion Used On: Chevrolet Small Block or Big Block V8 Engines w/ 153-Tooth or 168-Tooth Flywheel Lester Number : 3510, 3631, 3838 Notes : Upgrade the old, heavy Delco 10MT design to a lightweight Hitachi OSGR design (Lester 18492). Ideal for hi-performance, marine & street-rod applications. Includes shim kit and 2) 3/8-16 x 4 in. bolts (3/8 shank, 9/16 hex drive). Components : 79-81107 Mtg. Shim Kit Features : 100% New Rotatable mounting pad 1.4 kW Output

Starter/Generator - Hitachi
12 Volt

                          

$136.95

Part # 15423N Starter/Generator - Hitachi 12 Volt Used On: E-Z-GO 4-Cycle Golf Carts Replaces: E-Z-GO 27065G01, Hitachi GSB107-10B Lester Number : 15423 Features : 100% New

Starter/Generator - Hitachi
12 Volt

$136.95

Part # 15425N Starter/Generator - Hitachi 12 Volt Used On: Yamaha G2, G8, G9, G14 Golf Carts Replaces: Hitachi GSB107-06B, Yamaha J38-81100-11 Lester Number : 15425 Features : 100% New

RPM Limiter

$149.95

Part #600 Includes Extra Leads & Mounting Hardware, Digital Microcontroller Provides Greater Accuracy (+/-0.01%) Over Analog, Rotary Switches Permit Settings with Resolution of 100-9900 RPM's, Reverse Voltage Protection, Compatible with TTL Interface Tachometers Application: 12V Negative Ground 4, 6 or 8 Cylinder & Fire Engines with Single Coil Inductive Ignition Applications References: Pertronix 515018

Starter/Generator - Hitachi
12 Volt

$212.95

Part # 15424N Starter/Generator - Hitachi 12 Volt Used On: Yamaha G1 Golf Carts w/ 2-Cycle Engines Replaces: Hitachi GSB107-02, Yamaha J10-81100-10 Features : 100% New

ATV Winch 2500 pound

$122.95

Part # 431-01000 #2500 Winch Kit, Includes Motor & Drum Assembly, 30' of 7/32" Cable, Control Relay Unit, Quick Connect Remote Cable, Fairlead, Snatch Block & Mounting Hardware Application: Designed for use on ATV, Utility & Small Marine Applications

Battery Isolator
Neg. Grd., 2-Batteries, 1-Alternator, 100 Amp Max. Alternator Output

                          

$68.95

Part # 2-100 Battery Isolator Neg. Grd., 2-Batteries, 1-Alternator, 100 Amp Max. Alternator Output For : Dual Battery Systems w/ 100A Max. Charging Systems (except Delco CS Series) Dimensions : 4.5 in. L x 4.55 in. W x 2.52 in. H 114mm L x 116mm W x 64mm H 1/4-28 Terminals Features : Transpo Blue aluminum finned heat sink Press-fit diodes Welded connections

Battery Isolator
Neg. Grd., 2-Batteries, 1-Alternator, 130 Amp Max. Alternator Output

$66.95

Part # 2-130 Battery Isolator Neg. Grd., 2-Batteries, 1-Alternator, 130 Amp Max. Alternator Output For : Dual Battery Systems w/ 130A Max. Charging Systems (except Delco CS Series) Dimensions : 6.5 in. L x 4.55 in. W x 2.52 in. H 165mm L x 116mm W x 64mm H 5/16-18 Terminals Features : Transpo Blue aluminum finned heat sink Press-fit diodes Welded connections

ATV Winch 3500 pound

$162.95

Part# 431-01002 #3500 Winch Kit, Includes Motor & Drum Assembly, 30' of 7/32" Cable, Control Relay Unit, Handlebar Mounted Control Switch, Fairlead, Snatch Block & Mounting Hardware Application: Designed for use on ATV, Utility & Small Marine Applications

OMC Marine Applications

$120.95

Part # 430-20002 Includes 2 Wire Harness With 2 Blade Plug Application: OMC Marine Applications References: JANNCO 430-20002R Miscellaneous Vendor 40-259 OMC Outboard Marine 380361, 382138, 382220 Prestolite 40-217, 40-259, ESW4005, ETK4102

Battery Isolator
Neg. Grd., 3-Batteries, 1-Alternator, 165 Amp Max. Alternator Output

$120.95

Part # 3-165 Battery Isolator Neg. Grd., 3-Batteries, 1-Alternator, 165 Amp Max. Alternator Output For : Three Battery Systems w/ 165A Max. Charging Systems Used On: Heavy Duty Truck Applications Dimensions : 9.0 in. L x 4.55 in. W x 2.52 in. H 229mm L x 116mm W x 64mm H 5/16-18 Terminals Features : Transpo Blue aluminum finned heat sink Press-fit diodes Welded connections

1979-1985 OMC Marine

Stern Drive 2.5L & 3.0L Motors

$227.95

Part # 430-20003 Includes 3 Wire Harness With 3 Ring Terminals Application: 1979-1985 OMC Marine Stern Drive 2.5L & 3.0L Motors References: JANNCO 430-20003R OMC Outboard Marine 982069, 982073, 983318 Prestolite 40-468, ESQ4005, ESQ4008, ESQ4010, ESQ4017

Chrome Plated Alternator Kit

                          

$82.95

Part # 26-102-4 Chrome Plated Alternator Kit For : Delco 10SI Series IR/EF Alternators Lester Number : 7127, 7128 Dimensions : Mtg. Ear Hole Size: 5/16-18 Mtg. Foot Hole Size: 10mm Notes : With 1-groove pulley. Requires

Chrome Plated Alternator Kit

$80.95

Part # 26-213-3 Chrome Plated Alternator Kit For : Ford 1G Series 40-65A ER/EF Alternators Lester Number : 7057, 7058, 7078, 7079

Yamaha Marine

$137.95

Part # 430-22028 2-Wire Configuration, Ring Terminals, (3) 6mm Unthreaded Mounting Holes Application: Yamaha Marine Applications References: Lester 10830 PIC Picture ID 107-130 Yamaha 6H1-43880-02

Mercury & Mariner 25-50HP Engine

$220.95

Part # 430-22034 (4) 6.7mm ID Unthreaded Mounting Holes Application: Mercury & Mariner 25-50HP Engine Applications References: Lester 10828 Mercury Marine 827675A1

Carburetor, Downdraft, Gasoline

$643.95

Part # 0-13340 228 Series Model Downdraft Carb, Mechanical Accelerator Pump, Automatic Choke, Replaceable Venturi Sizes Accommodate Many Engine Applications, Ball Bearings on Throttle Shaft for Low-Friction Operation, Lip Seals on Throttle Shaft, 10.3mm Mounting Holes Application: Hyster Lift Truck with Continental F226 & F227 Engine Applications References: Zenith Fuel Systems 13340

Volvo Penta Marine

$153.95

Part # 430-22022 2-Wire Configuration Application: Volvo Penta Marine Applications References: Lester 10819M PIC Picture ID 107-119M Volvo 3586765, 3856596, 3857265-7, 3857489, 3861027-5, 854346-4, 854525-3

Carburetor, Downdraft, Gasoline

                          

$309.95

Part # 0-13972 Model 33, Includes Gasket, 1/8-27 Inch Pipe Thread, Fuel Inlet Fitting, Choke Bore 46.9mm ID, Throttle Bore 30mm, Engine Size 30-140 CID References: Zenith Fuel Systems 13972

Carburetor, Downdraft, Gasoline

$518.95

Part # 0-14125 33 Series Model Downdraft Carburetor, Engine Size 30-140 CID, Throttle Bore 1.181, .865 inch, Choke Bore 1.804 inch, Venturi Diameter o12-28mm Range, Fuel Inlet Fitting ,1/8-27 Inch Pipe Thread, Engine Carburetor #G9JL-KA Application: Ford Valencia 1.1 & 1.3 Liter Applications References: Zenith Fuel Systems 14125

Carburetor, Sidedraft, Gasoline

$295.95

Part # 0-13262 Includes (1) Throttle-Side Gasket, 3-Position Spring-Loaded Choke Plate with Poppet Valve, Concentric Fuel Bowl, Choke Bore 34.6mm, Throttle Bore 29.7mm, Throttle Mounting Holes 8.8mm Wide x 10.4mm Long Unthreaded, 1/8-27 NPT Fitting References: Zenith Fuel Systems 13262

Carburetor, Sidedraft, Gasoline

$280.95

Part # 0-12708 Includes Gasket, Model 87, Choke Bore 34.7mm, Throttle Bore 30mm, 1/8-27 NPT Fuel Inlet, Zinc Die Cast, Reversible Choke & Throttle Levers, 11mm Hex Bolt Plug for Fuel Bowl Drainage References: National Stock Number 2910004098874 Zenith Fuel Systems 12708

Carburetor, Downdraft, Gasoline

$403.95

Part # 0-14141 33 Series Model Downdraft Carb, Engine Size 30-140 CID, Throttle Bore 1.181, .865 inch, Choke Bore 1.804 inch, Venturi Diameter o12-28mm Range, Fuel Inlet Fitting ,1/8-27 Inch Pipe Thread Application: Ford 2.3 Liter Industrial Applications References: Zenith Fuel Systems 14141

Carburetor, Sidedraft, Gasoline

$237.95

Part # 0-11532 Includes Gasket, Model 87, Choke Bore 34.7mm, Throttle Bore 30mm, 1/8-27 NPT Fuel Inlet, Zinc Die Cast, Reversible Choke & Throttle Levers, 4.8mm Allen Head Plug for Fuel Bowl Drainage References: National Stock Number 2910009616200 Zenith Fuel Systems 11532